• Massage Warehouse
  • Allegro Medical
  • Advantage Medical

Vasyli Orthotics Heat Gun

# 347 0027
Rate this product



 Vasyli Orthotic Heat Gun

  • To be used with Vasyli Custom fit orthotics. 
  • Cannot be replaced by a hair dryer
  • ***Must be purchased by a licensed healthcare professional
  • Check the shoe and remove any form of thick lining or arch cushion
  • Pick an orthotic that closely fits the contour of the foot (size comparison of the shoe for length).
  • Be sure the distal edge of the orthotic finishes 5-10mm behind the bisection of the 1st MP
  • Device should hit the very back of the shoe and ask patient to walk around. If irritations occur, use heat to mold
  • May take a few days for the patient's feet to get used to the orthotic
  • Place orthotic, base up, on a heat resistant surface
  • Apply heat in a wave motion between the 2 sorbon inserts
  • Do no concentrate the heat to one spot
  • Once lettering of the Thermal Indicator disappear it ensures molding temperature has been reached (194ºF/90ºC). You have 2 minutes to mold
  • Have the patient sit, and place the heated orthotic into the shoe
  • Place their foot into the shoe
  • Hold and palpate the foot in the neutral position. Ask the patient to stand and distribute their weight evenly with a neutral position
  • Palpate the shoe and mold up into the arch area and round the heel cup. Press down in the forefoot to mold the last of the shoe
  • Have the patient sit and control the neutral position until fully seated.
  • Remove the orthotic and allow it to cool for 5 minutes
  • If necessary, add Vasyli orthotic additions or wedges
*Note Vasyli Armstrong II has specific heating instructions. See product page for details (722 0183)



African Mango Lean
Skinny Me Tea, Natural Herbal Diet, Cleansing Tea
Vasyli Metatarsal Raise (One Size Fits Most) 5 Pairs/Pack
IMAK® Tennis Elbow Band Universal
Health History Form, 100/Package